Wabbit Programming

Single turnout DCC addresses

Smart Rout DCC addresses

120. Set all (1-12) turnouts to always Clear

Diagram of Smart Rout 120 All turnouts in the CLEAR state

121. Clear/throw: turnouts 1, 5 always Clear; 6 follows.

122. Clear/throw: turnouts 1, 5 always Throw; 6 follows.

123. Clear/throw: turnouts 2, 8 always Clear; 7 follows.

124. Clear/throw: turnouts 2, 8 always Throw; 7 follows.

125. Clear/throw: turnouts 3, 9 always Clear; 10 follows.

126. Clear/throw: turnouts 3, 9 always Throw; 10 follows.

127. Clear/throw: turnouts 4, 12 always Clear; 11 follows.

128. Clear/throw: turnouts 4, 12 always Throw; 11 follows.

Diagrams of Smart Routs 121, 123, 125 and 127 in the CLEAR and THROWN state

Diagrams of Smart Routs 122, 124 126 and 128 in the CLEAR and THROWN state

Wabbits

There are 6 Wabbits each controlling 2 turnouts.

Turnout CV

The following CVs are defined for each turnout (* not the default must be set)

*CV 49	0/1	See page 3. Defines which Tortoise position is Clear
*CV 50-53	0-3	Smart route action 0 – follow, 1 – NOT follow, 2 – Thrown, 3 - Clear
*CV 64	2	Power-up Position, 2 – Clear, 3 – Thrown In all cases set to 3 to Clear correctly
CV 65	15	Default Switch Speed
CV 66	7	Default Inhibit all dispatch override
CV 67	0	Default Auto Throw Timer
CV 68	0	Default 0 (normal) - 1.Semaphore operation
*CV 69	0	Auto Return Enable – none
CV 70	15	Default Auto Return delay
CV 71	0	Default SPDT /w Center off or 2 buttons
CV 72	0	Pushbutton lockout
CV 73	0	Pushbutton lockout accessary
*CV 74	3	Number of Smart Routs