• Making 60 of anything must be boring and this is only the first step, squaring the stock for the arms. I now have 60+ blanks ready for drilling.
  • Made arm jig A
  • The mill digital rpm reading is again on the fritz. Cleaned grease out of the sensor again.
  • The spindle pin, used to hold the spindle while installing/removing a collet, sucks. The Spindle pin that came with my mill is too small in diameter and is distorting the hole in the spindle. So it's make or buy a spanner. So what size?? or make the first prototype. Cut off a "crescent wrench" length of mystery steel bar.
  • Don't like the results of the adapter for the rotary table made in steel. Starting over with brass rod.