Loaded first YouTube video. Grand Tour with Signals, highlighting issue with late changes to signals aspect. Ugly. May take it down.
Sent first draft of a post to Al at modelrailwaylayoutplans{DOT}com. We will see if that gets any viewers. On second thought I hide the Youtube video. ~~ Really bad.
Added an "other" command to DCC++.
Command <I {text string}> Raspberry Pi adds {text string} to the log file and prints {text string}
Response <I {time string}> returned from Raspberry Pi
Documented new command. <I {String of information added to logger and returned}>
While thinking about an answer for the timing issue, I thought of a better way to change a semaphore aspect. Instead of moving the arm in 10 equal steps, it looks as good or better to move the arm in 3° steps until the new aspect is reach. This also helps the timing issue.
Updated documentation for added Turnout sensor commands.
When building the second version of the Monitor bracket, the holds for the LEDs were not round. How does a normal 1/4" drill cut a pentagonal hole? Checking everything I finely realized that the mill spindle was the problem. When pressed hard the spindle visible moves. Next big job - replacing the spindle bearings.
