Turnouts fixed. Can now run locos around track. BACK loco is set up in some dumb way that it only runs and half the seed of the others. Just ordered a RED ML-8 switcher. Just can't deal with this.


Working on IR sensor cabling. Tedious but progressing. Running two locos while building cables and every once in a while, like once an hour the loco jumps the track at turnout #1 coming from block 16.


Tried pushing and then pulling the track cleaner around the track. Turns are too tight for the track cleaner. When I get the track down again will see if mods can be made.


IR sensor cabling done. Testing revealed several issues. The design of having 16 plugs side by side not good. Can make it work